The desktop robot from the AGILUS-3 series features a compact design with a 7kg rated payload and 700mm/900mm reach. It is widely used in various scenarios for small parts such as 3C electronics and automotive components, including handling, assembly, inspection, and glue dispensing. Its exquisite and compact structural design fits into narrow spaces while delivering powerful motion performance. For ease of use, it features fast zero-point recovery to effectively improve production efficiency. The standard model comes with a 12-pin IO interface on the body, including 4 Ф4 air tubes. It is standard equipped with IP67 protection, suitable for harsher environments. It pairs with the KR C5 micro controller, which features a 16-in/16-out IO interface, compact form factor, and energy-efficient operation.

Typical applications: General purpose.

What we see on this model in the field

On high-cycle pick-and-place duty we most often see gearbox wear on axes 4-6 and connector fatigue in the base. The KR C5 micro controller is robust, but check the KCB cable routing if the robot was ceiling-mounted.

Buying or selling one?

If you're buying, demand the serial number and operating hours, then verify payload and reach against the official specs in the table above. If you're selling, we buy used KUKA robots of all series — on-site appraisal, prompt settlement.

Frequently asked questions

QCan you repair a KUKA KR 7 R700-3?

Yes. Our engineers service the full KUKA range including the KR 7 R700-3 — servo and gearbox overhaul, controller repair, mastering and calibration, with warranty on our work.

QDo you sell used KUKA KR 7 R700-3 robots?

Stock changes weekly. Tell us the model and your application — if it's not in the warehouse we source it, inspect it against the official specs above, and commission it on-site.

QWhat should I check before buying this model used?

Demand the serial number and operating hours, verify payload/reach against the official table, and have the repeatability measured at working speed. Our inspection report covers gearbox backlash, controller logs and mastering data.

Official product image © KUKA, used for reference. Specifications compiled from official product publications for reference when buying or servicing used machines. Henghuan is an independent service provider, not affiliated with or endorsed by KUKA, FANUC or ABB.